DR 372111, Safety & Operating Instructions Manual

Page: 44 / 44

7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
©2015 Country Home Products, Inc. All rights reserved 372111
Daily Checklist for the 3-POINT HITCH DR SELF-FEEDING CHIPPER
To help maintain your 3-POINT HITCH DR SELF-FEEDING CHIPPER for optimum performance, we recommend you follow this
checklist each time you use your Chipper.
[ ] BELT: Check the Belt for wear, proper alignment and tension.
[ ] KNIFE and WEAR PLATE: Check the Knife and Wear Plate for tightness, nicks and wear.
[ ] GENERAL CONDITION: Check the general condition of the machine, e.g.; nuts, bolts, welds, etc.
[ ] HOPPER: Check that there is no material left in the hopper before starting the Chipper.
Disengage PTO, shut down the tractor engine, remove the key, wait for all moving parts to come to a complete stop, disconnect
the PTO shaft from the tractor, then wait 5 minutes before performing any maintenance procedure or inspection on the chipper.