DR 372111, Safety & Operating Instructions Manual

Page: 3 / 44

CONTACT US AT
www.DRpower.com
3
Chapter 1: General Safety Rules
Labels
Your 3-Point Hitch DR SELF-FEEDING Chipper carries prominent labels as reminders for its proper and safe use. Shown below
are copies of all the safety and operation labels that appear on the equipment. Take a moment to study them and make a note of
their location on your 3-Point Hitch DR SELF-FEEDING Chipper as you assemble and before you operate the unit. Replace
damaged or missing safety and operation labels immediately.

Read this Safety & Operating Manual before you use the 3-Point Hitch DR SELF-FEEDING Chipper. Become familiar with the
operation and service recommendations to ensure the best performance from your machine.

Thoroughly inspect the area in which you will be working and remove all foreign objects. Look for Rope, Wire, ECT., and
remove these objects before chipping. Inserting these objects into the chipper hopper could damage the machine and/or
cause injury.

This is a high-powered machine, with moving parts operating with high energy at high speeds. You must use proper clothing
and safety gear when operating this machine to prevent or minimize the risk of severe injury. This machine can crush, grind,
cut and sever parts of your body it they enter the inlet or discharge area of your chipper.
#241801
#
241811
#
248821
#
241831