DR 11.5 Chipper Shredder, Safety & Operating Instructions Manual

Page: 6 / 36

6
DR
®
11.5 CHIPPER SHREDDER

To safely store, allow the Engine to cool completely before moving into any enclosure. Never store a machine that has gas in
the tank, or a Fuel Container, near an open flame or spark such as a water heater, space heater, clothes dryer, or furnace.

Never make adjustments or repairs with the Engine running. Shut down the Engine and wait 5 minutes for parts to cool.
Disconnect the Spark Plug wire, keeping it away from the Spark Plug, to prevent accidental starting before making
adjustments or repairs.

Never tamper with the Engine’s Governor setting. The Governor controls the maximum safe operation speed and protects
the Engine. Over-speeding the Engine is dangerous and will cause damage to the Engine and to the other moving parts of the
machine. If required, see your authorized dealer for Engine governor adjustments.

Keep combustible substances away from the Engine when it is hot.

Never cover the machine while the Muffler is still hot.

Do not operate the Engine with the Air Cleaner or the Carburetor Air Intake Cover removed. Removal of such parts could
create a fire hazard. Do not use flammable solutions to clean the Air Filter.

The Muffler and Engine become very hot and can cause a severe burn; do not touch.
Operating this CHIPPER SHREDDER safely is necessary to prevent or minimize the risk of death or serious injury. Unsafe
operation can create a number of hazards for you. Always take the following precautions when operating this machine:

Your CHIPPER SHREDDER is a powerful tool, not a plaything. Exercise extreme caution at all times. The machine is
designed to chip wood and shred most organic materials. Do not use it for any other purpose.

Thoroughly inspect the area in which you will be working and remove all foreign objects. Look for rope, wire, etc., and remove
these objects before chipping/shredding. Inserting these objects into the CHIPPER SHREDDER Hopper could damage the
machine and/or cause injury.

Know how to stop the CHIPPER SHREDDER quickly; see “Stopping the Engine” in Chapter 3.

Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to avoid slipping or falling.

See manufacturer’s instructions for proper operation and installation of accessories. Only use accessories approved by DR
Power Equipment.

Never use the machine without ensuring that all guards and shields are in place.

Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the CHIPPER SHREDDER.
This includes all shields and guards. Modifications to your machine could cause personal injuries, property damage, and will
void your warranty.

Never use the machine with the Chipper Chute, Shredder Hopper, Blowback Guards, or Discharge Deflector removed.

Never place any part of your body in the Chipper Chute, Shredder Hopper, discharge opening, or near any moving part while
the machine is running. Keep the area of discharge clear of anything that will obstruct a clear discharge. Wind can also
change discharge direction, so be aware. If it becomes necessary to push material into the Chipper Chute or Shredder
Hopper, use a small diameter stick, NOT YOUR HANDS.

Keep your face and body back from the Chipper Chute and Shredder Hopper to avoid accidental bounce back of any material.

Do not allow an accumulation of processed material to build up in the discharge area as this will prevent proper discharge
and could result in kickback.

Allow only one person to operate the CHIPPER SHREDDER at any time.

Always operate the machine from the Operator Zone (see Figure 7
on page 13). Never pass or stand on the discharge side of
the machine when the Engine is running or the Flywheel is turning.

If the machine starts making an unusual noise or vibration, Shut down the Engine and wait 5 minutes for parts to cool,
disconnect the Spark Plug wire, keeping it away from the Spark Plug to prevent accidental starting before making adjustments
or repairs. Vibration is generally a warning of trouble. Check for damaged parts and clean, repair, and/or replace as
necessary.

Never tamper with safety devices. Check their proper operation regularly.
Safety with Gasoline - Powered Machines (Continued)
General Safety