14
After each use, make sure to clean the nebulizer instantly with the mineral water before storing or
carrying. Attention
1. Clean the remaining medication：
• Open the cover of the medication
chamber and discard the remaining
medication.
• Pour a small amount of mineral water
into the medication chamber and close
the cover.
• Press and hold for 3 seconds
“START/STOP” button ,the power
indicator LED ( orange ) will be flashed
and medication chamber will be lit on
blue color , then go to “cleaning process” to nebulize the water for 2 minutes to remove the residual
medication in the medication chamber until the mineral water depleted.
2. Dismantle the nebulizer:
Remove the medication chamber, and inhalation
mask or mouthpiece from the nebulizer.
Attention
3. Clean the parts with sufficient amounts of distilled
water:
Clean the medication chamber, mouthpiece,
inhalation mask with distilled water.
How to clean after using
The inhalation mask in first use must be
cleaned with distilled water and dried.
These parts can be reused after
disinfecting treatment ( please refer how
to Disinfect in page 16)
If the device give off the high frequency
sound and the mineral water is depleted,
please release the “START/STOP” button
to turn the power off. Otherwise, the
mesh of the medication chamber may be
broken.
Please clean the remaining medication
after each use. Otherwise, the mesh of
the medication chamber may become
blocked.
