11
You can also fill a 0.9 % Sodium Chloride (Table salt) solution in the medication chamber and then
press “START/STOP” button for a function test after reassembly and before use. If the nebulizer
cannot spay out, please go to page 18 for troubleshooting.
1. Turn on the power:
Press the “START/STOP” button, and the power indicator
(green) will light constantly. And medication chamber will be
lit with blue color constantly.
Attention
If there is no medication inside the medication chamber ,
and the power is turned on,
The nebulizer’s power indicator (green) will be turned on
around 0.5 second, then the power indicator will be changed
to orange color immediately. After 8 seconds, medication
chamber light and shut off power automatically.
In the operation while medication was depleted : the power indicator will be changed to orange color
immediately and turned-off medication chamber light ,then shut off automatically
the longest nebulization time : 30 minutes .
Pure water is not applicable for use. If you fill pure water in the medication chamber, the nebulizer can
not be functioned well.
How to operate the nebulizer