the search coil is distant from the
ground, and then turn on the unit
again.
Make irregular sound or target
recognition cursor jump
1. Do not use it indoors, because
there is more metal indoors.
2. Whether there are
electromagnetic interference
sources nearby, such as power
lines, cables, electronic walls,
projectors, routers, etc. These
places should be avoided, or try to
reduce the sensitivity.
The signal is unstable, and the
target recognition cursor position
changes.
1. Scanning was performed at
another angle to determine
whether a more stable signal could
be obtained.
2. Slow down or accelerate the
probe disk scan speed to get a
more stable signal.
3. Several metal targets may be
buried. You can try to improve
your sensitivity or set different
discrimination ranges for scanning.
4. Perhaps finding severely
oxidized targets, or severe ground
magnetization may be attempted
to reduce sensitivity.
Using the PINPOINT, the search
coil sounds near the ground
1. Ground magnetization. Start the
PINPOINT mode near the ground
to reduce the PINPOINT sensitivity.
2. There are metals underground.