background image

Preface

This product is a product with excellent sensitivity and discrimination
ability, can identify and display six categories of metals, but also can
finely indicate the metal material by using two digits. The boot is set to
the most commonly used NORMAL state, reducing error operation.The
working mode is set according to the scene. The 8 LED's indicate the
working mode and the signal intensity, which is both convenient and
eye-catching, bringing a new feeling for beginners.

READ CAREFULLY BEFORE OPERATION OF THE DEVICE LEGAL
DISCLAIMERS

*Comply with applicable laws and regulations governing the use of
metal detectors while using this detector. Do not use the detector
without authorization in protected or archeological sites. Do not use
this detector around unexploded ordnance or in restricted military
zones without authorization.
*Notify appropriate authorities with details of any historical or
culturally significant artifacts you find.
*When excavating a target, use reasonable methods, avoid destroying
vegetation. Leave the land and vegetation as you found it, fill in any
holes after excavation.

No trespassing. Before you start detecting obtain permission to search
from the landowner, regardless of the status, or perceived status, of the
land. Remember that all land(including parks, public open-spaces,
beaches, and foreshores) has an owner and an occupier(such as a
tenant farmer) can only grant permission with both the land owner's
and tenant's agreement. Any finds discovered will normally be the
property of the landowner, so to avoid disputes it is advisable to get
permission and agreement in writing first regarding the ownership of
any finds subsequently discovered.

Summary of Contents for MT-XE


























Reviews: