Water may be cloudy from carbon dust when a new replacement filter is installed or when existing filter has not been used for an
extended period of time (3 weeks). This is normal and harmless. Be sure to sufficiently flush your new filter before filtering water to
drink by doing the following:
STEP 8 – FLUSHING THE FULL SPECTRUM WATER FILTER
The Full Spectrum Water Filter faucet comes with the battery pre-installed.
To activate the battery, simply pull the plastic tab on the faucet handle.
The battery is now activated and the LED will flash BLUE-YELLOW-YELLOW-BLUE.
STEP 9 – ACTIVATING THE BATTERY
Blue Valve
Quick Connect
Fitting
1
2
3
Turn the source of water on. Then open the blue valve on the Angle Stop Adapter (T-Valve).
Turn on the Full Spectrum Water Filter Faucet and allow water to run for 1-2 minutes to
flush the filter or until the water runs clear.
During this time, check all connections for leaks.
1
2
3
12 | User Manual
Pull To Activate
