INSTALLATION GUIDELINES
STEP 1 – FAUCET LOCATION
Use an existing soap dispenser hole or drill a 1/2” hole in the
sink or countertop where you plan on installing your faucet.
See Diagram to the right, Step 2
Slide the chrome plated metal flange and the large Rubber
Washer onto the threaded mounting shaft of the faucet.
Insert the threaded mounting shaft of the faucet through the
1/2” hole at the sink. (Faucet now resting in the 1/2” hole.)
STEP 2 – INSTALL THE FAUCET (ABOVE THE COUNTER)
See Diagram to the right, Step 3
From under the counter, install the plastic washer, then the
small rubber washer onto the threaded mounting shaft.
Thread the lock washer onto the threaded mounting shaft.
Thread the locking nut onto the threaded mounting shaft
and tighten to secure the faucet to the sink.
STEP 3 – SECURE FAUCET TO SINK (UNDER THE COUNTER)
1
1
2
1
2
3
User Manual | 9
Display
Battery Holder
Located Here
Chrome Plated
Metal Flange
Large Rubber
Washer
Small Rubber
Washer
Lock Washer
Locking Nut
Plastic Washer
12.5 mm
(1/2”) Hole
Counter Top
STEP 2
STEP 3
