16
GB
Timer adjustment
Jumper, left side
Switching to coin box operation
2 persons are required for this procedure.
• When the coin box is not connected yet,
separate the sun bed completely from the
power supply.
• While one person keeps the [up] and
[down] buttons at the timer control panel
simultaneously pressed, the other person
shall connect the sun bed to the power
supply.
• When the coin box is already connected,
the sun bed must not be disconnected
from the power supply.
In this case proceed as follows:
one person keeps the [up] and [down]
buttons at the timer control panel simulta-
neously pressed.
- the other person shall start the coin box
running by throwing in a coin (token).
• Keep pressing the [up] and [down] buttons
until “0” appears on the timer display.
The sun bed is now coin box operated.
After being released by the coin box the
time will start counting from “0” minutes up-
wards.
The sun bed can be turned on or off within
this time.
The [up] and [down] buttons are locked, the
other buttons remain functional.
The pre-set time has elapsed, the sun bed
will be completely switched off and time dis-
play will go out.
Attention: The fan delay has to be
executed by the coin box!
Returning to timer operation
Returning the sun bed back to timer operati-
on is only possible if the coin box is comple-
tely disconnected and the jumper “L1-Time”
is restored (see connection diagram).
2 persons are required for this procedure.
• Disconnect the sun bed completely from
the power supply.
• While one person keeps the body fan
and face tanner buttons simultaneously
pressed, the other person shall connect
the sun bed to the power supply again.
• Keep pressing both buttons until “88” ap-
pears on the timer display.
• The display will go out thereafter.
The sun bed is now timer operated.
Jumper, left side (fan delay)
opened = without fan delay
closed = with fan delay
