EN
17
Further information
Measurements should not occur soon after each other, since otherwise,
the results will be falsified. Wait therefore for several minutes in a relaxed
position, sitting or lying, before you repeat a measurement.
Delete memories
Before you delete all memory readings
stored in, make sure you won’t need
refer to them at a later date. Keeping
a written record is prudent and may
provide additional information for your
doctor’s visit.
To delete stored memory readings,
hold on MEMORY button down till LCD shows a symbol of «CL» flashing.
Release the button. Press the MEMORY button while «CL»is flashing to
complete the operation. It is impossible to erase the values individually.
ERROR MESSAgES/
TROUBLEShOOTINg
If an error occurs during
a measurement, the measurement
is discontinued and a corresponding
error code is displayed.
(picture: error no. 2)
Error No.
possible cause(s) / solutions
ERR 1
The systolic pressure was deter-
mined, but then the pressure in the
cuff went down to less than 20 mmHg
(diastolic blood pressure can’t be
measured).
The tube may have loosened after
the systolic pressure has been deter-
mined. Pulse could not be detected.
1
M
Summary of Contents for M-100A
Page 2: ......
