EN
15
6. Remain seated quietly for two minutes before you
begin the measurement.
measuring
P
rocedure
to carry out measurement.
1. Press the START button. The built-in microprocessor
begins to inflate the cuff. In the display, the increasing
cuff pressure is continually displayed.
2. After automatically reaching an individual pressure,
the pump stops and the pressure slowly falls. The
cuff pressure is displayed during the measurement.
When the device has detected your pulse, the heart
symbol on the display begins to blink and a beep tone
is audible for every pulse beat.
reading
M
easurement
Results
When the measurement has been
concluded, a long beep tone sounds. The
measured systolic and diastolic blood
pressure values, as well as the pulse
are now displayed. The appearance of
this symbol
signifies that an irregular
heartbeat was detected.
This indicator is only a caution. It is
important for you to be relaxed, remain still
and do not talk during measurements.
note:
We recommend contacting your physician if you see this indicator
frequently.
TIME
TIME
TIME
SYS blood
pressure
DIA blood
pressure
Pulse
Summary of Contents for M-100A
Page 2: ......
