background image

Specifications

Specifications for the MUX are shown below.

Dimensions

17.0"(W) X 12.0"(D) X 1.75"(H)

Mounting

The MUX can be mounted in a 19" or 23" rack.

The MUX unit can also be wall mounted.

Power Input -24 DC unit: -18 to -36 VDC @ 200 mA

-48 DC unit: -36 to -72 VDC @ 180 mA (max)
30 mA (typical).

Fuse

1/2 Amp

Operating Temperature Range

0 degrees to +60 degrees Celsius.

Humidity

0% to 95% non-condensing

Interface

1-RS232 (DB9) Craft Port on the front,
9 DB9 connectors on the back.

Buffers

16k byte on each MUX channel.

Electrical Interface:

Common Port: RS232
Eight Channel (source) Ports: RS232

Data Rates:

300, 1200, 2400 and 9600 Baud.

All specifications are subject to change without notice.

Options & Model Numbers

The ASCII MUX part numbers and options are listed below.

These options are constantly expanded. As a result, more op-
tions may be available than are listed below. Contact your dis-
tributor for currently available options.
D-PC-180-10A-02

ASCII MUX: RS 232, Wire-Wrap Connecions,
-24VDC.

D-PC-180-10A-04

ASCII MUX: RS 232, Wire-Wrap Connections
-48VDC.

D-PC-180-10A-12

ASCII MUX: RS 232, Connectorized, -24VDC.

D-PC-180-10A-14

ASCII MUX: RS 232, Connectorized, -48VDC.

8

D-PC-180-10A-XV

March 1997

4955 East Yale Avenue - Fresno, CA 93727 - Phone (559) 454-1600 / (800) 622-3314 - FAX (559) 454-1688

e-mail: [email protected]

Visit our Web site at http://www.dpstele.com

DPS INC

"Your Partners in Telemetry Monitoring Systems"

Summary of Contents for ASCII MUX









Reviews: