4
Hardware Installation
4
Tools Needed
4.1
To install Site Dialer G3, you'll need the following tools:
Phillips No. 2 Screwdriver
Small Standard No. 2 Screwdriver
Voltmeter
PC with T/AccessMW software
Mounting
4.2
Fig. 4.2.1.
Site Dialer G3 can be flush or rear-mounted
WARNING
: Leave one rack unit vacant above the Site Dialer G3 to provide adequate heat ventilation.
Site Dialer G3 mounts in a 19" rack or a 23" rack using the provided rack ears for each size. Two rack
ear locations are provided. Attach the appropriate rack ears in the flush-mount or rear-mount locations
shown in Figure 4.2.1.
Note:
Rack ears can be rotated 90° for wall mounting or 180º for other mounting options.
Fig. 4.2.2
Fig. 4.2.3
