DPS Telecom D-PK-TDFG2, User Manual, Page: 88 / 114

82
defined and an SNMP trap
event occurred.
would like to send SNMP trap
events, or configure the event not
to trap.
39 SNMP Community Error
Community string does not
match your SNMP master's
community string.
Verify both community strings to
make sure they match.
40 LAN TX packet drop
An error occurred transmitting
data over LAN.
Verify that you can ping both
devices.
41 Notification 1 Failed
A notification 1 event, such as
a
page or email, was
unsuccessful.
Verify that you can ping both
devices.
42 Notification 2 Failed
A notification 2 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
43 Notification 3 Failed
A notification 3 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
44 Notification 4 Failed
A notification 4 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
45 Notification 5 Failed
A notification 5 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
46 Notification 6 Failed
A notification 6 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
47 Notification 7 Failed
A notification 7 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
48 Notification 8 failed
A notification 8 event, such as
a
page or email, was
unsuccessful.
Use RPT filter debug to help
diagnose notification problems.
49 NTP Failed
Communication with Network
Time Server has failed.
Try pinging the Network Time
Server’s IP Address as it is
configured. If the ping test is
successful, then check the port
setting and verify the port is not
being blocked on your network.
50 Timed Tick
Toggles state at constant rate
as
configured by the Timed Tick
timer
variable. Useful in testing
integrity of
SNMP trap alarm reporting.
To turn the feature off, set the
Timed
Tick timer to 0.
51 Serial 1 RcvQ full
Serial port 1 (or appropriate
serial port
52 Dynamic Memory Full Not expected to occur.
Call DPS Tech Support (559)
454-1600.
53 Unit Reset Unit has rebooted.
If unintentional, call DPS Tech
Support:
(559) 454-1600.