DPS Telecom D-PK-TDFG2, User Manual, Page: 58 / 114

52
Global Settings
Modbus Poll Delay Delay between Modbus polls in milliseconds.
Modbus Poll
Timeout
Time duration before the Modbus repsonse time fails in seconds.
Send Notification
of every register
update
This option is used to send a notification whenever a Modbus register is polled.
If the poll delay is too low this may cause some notifications to be lost.
Device Settings
ID Modbus device ID.
Device Type Modbus device type.
Connection TCP or Serial connection.
Host Name or IP IP used for polling when using TCP Modbus. Unused otherwise.
TCP Port or Serial
Port
TCP or physical serial port used when performing Modbus polling.
Modbus Address Address of Modbus device.
Device Register
Offset
Amount to offset "Modbus Address" by.
Threshold Mode This will configure different threshold values based on Modbus register values.
Threshold mode options:
1) "standard thresholds" - default threshold setting. Only one value of
thresholds will be used
2) "Idle/Running Thresholds: Status Register" - device idle thresholds
will be triggered based on the value of a status register.
3) "Idle/Running Thresholds: Point Reference" - device idle thresholds
will be triggered based on the value of a point reference.