DPS Telecom D-PK-TDFG2, User Manual, Page: 87 / 114

81
Description Port Address Point
Display 21
Digital Sensor 29 - Minor Under 99 1 1
Digital Sensor 29 - Minor Over 99 1 2
Digital Sensor 29 - Major Under 99 1 3
Digital Sensor 29 - Major Over 99 1 4
Digital Sensor 29 - Not Detected 99 1 5
Control 99 1 9-16
Value 99 1 17-32
Digital Sensor 30 - Minor Under 99 1 33
Digital Sensor 30 - Minor Over 99 1 34
Digital Sensor 30 - Major Under 99 1 35
Digital Sensor 30 - Major Over 99 1 36
Digital Sensor 30 - Not Detected 99 1 37
Control 99 1 41-48
Value 99 1 49-64
Display 22
Digital Sensor 31 - Minor Under 99 1 1
Digital Sensor 31 - Minor Over 99 1 2
Digital Sensor 31 - Major Under 99 1 3
Digital Sensor 31 - Major Over 99 1 4
Digital Sensor 31 - Not Detected 99 1 5
Control 99 1 9-16
Value 99 1 17-32
Digital Sensor 32 - Minor Under 99 1 33
Digital Sensor 32 - Minor Over 99 1 34
Digital Sensor 32 - Major Under 99 1 35
Digital Sensor 32 - Major Over 99 1 36
Digital Sensor 32 - Not Detected 99 1 37
Control 99 1 41-48
Value 99 1 49-64
Display Mapping
System Alarms 16.2
Disp
lay
Point Alarm Point Description Solution
1
33 Default Configuration
The internal NVRAM may be
damaged. the unit is using
default configuration settings.
Login to the TempDefender`s web
browser and configure the unit.
Power cycle to see if the alarm is
clear.
34 DIP Switch Configuration Invalid dip switch configuration.
Call DPS Tech Support: (559)
454-1600
35 MAC Address Not Set The MAC Address is not set.
Call DPS Tech Support: (559)
454-1600
36 IP Address Not Set The IP Address is not set.
See Section "Quick Start: How to
Connect to the TempDefender G2
via Craft Port." If not using the
TempDefender over LAN, set the
IP address to 255.255.255.255
37 LAN hardware error
The unit does not have a solid
LAN link to the hub, switch, or
router.
If connecting to a hub you might
require a LAN crossover cable.
38 SNMP Process Error SNMP trap address is not Define the IP address where you