![background image](http://html1.mh-extra.com/html/dps-telecom/d-pk-ngsui/d-pk-ngsui_user-manual_2525706030.webp)
26
modem. The most commonly used value is 30.
RTS Tail
Only used if your NetGuardian SUI was built with a 202
modem. The most commonly used value is 10.
Reach-Through
Enable Reach-through
Checking this box enables the port to be used as a terminal
server. Most commonly used to Telnet through the port over
LAN to a hub, switch, or router. From a command prompt,
type the following
(note the spaces between each entry)
:
telnet [IP address] [port]
Example
: telnet 192.168.1.100 3000
Port
Port number used for reach-through to a serial device.
Type
Select TCP or UDP traffic to be passed through to a serial
device.
Summary of Contents for D-PK-NGSUI
Page 79: ...75...