manualshive.com logo in svg

DPS Telecom D-PK-NGAAR, User Manual, Page: 62 / 80

Share
Download
DPS Telecom D-PK-NGAAR User Manual Download Page 62

58

Backup Configuration

13

With the NetGuardian AAR you can backup your current configuration from the Web Interface. These configuration
files can then be uploaded later, or uploaded to other NetGuardian AAR units. 

The Back up Config tab is located in the Device Access menu shown above.

How to backup your current configuration:

1. Click the Backup Config tab from the Device Access menu.
2. When prompted by your web browser, download the file to your desktop or other location on your computer.
3. Now your configuration should be saved. If you need to upload a configuration, follow the steps below.

To upload your configuration file, click  on 

Upload

 on the top right corner of the web interface

How to upload a saved configuration:

1. Click the upload button at the top right corner of the Welcome screen.
2. Click the Browse... button
3. Browse to the location of the .bin file from the steps above.
4. Select that .bin file and press the Upload button. 
5. You should now have the same configuration settings loaded from when you saved the .bin file above.

Summary of Contents for D-PK-NGAAR

















































































Reviews:

No comments