DPS Telecom D-PK-NGAAR, User Manual, Page: 32 / 80

28
4. At the SNMP Notification screen, you'll enter your network's SNMP settings. Enter the IP address of your
SNMP Trap Server. Enter the Trap Port Number (usually 162) and the Trap Community password. Click Save
and Next .
5. At the Schedule screen, you'll select the exact days/times you want to receive SNMP notifications. You can set
2 schedules per notification. For example, you may want to receive notifications at certain times during the week,
and at different hours on the weekend. Use the check boxes to select the days of the week, and select the time
from the drop down menus. Click
Save and Finish. To try a test notification, click the Test button (See next step.)
6. If you chose to test the email notification you've just setup, you will prompted with a pop up . Click OK to send a
test SNMP alarm notification. Confirm all your settings by checking your alarm master to see if the SNMP trap was
received.
NOTE: This test only means that your notification settings are correct, but you still need to assign the notification to
an alarm point. See Step 6 in "How to Send Email Notifications" for more detail.