39
8.2.10 Date and Time
From the Date Time menu, you will set the internal clock of the Remote Power Switch or synch it with a Network
Time server. If your Remote Power Switch should suffer a power failure or you need to reboot, you will have to
reset the unit's date and time unless the Network Time option is enabled.
The Edit > Date and Time menu
Time Settings
Date
Select the current month, day, and year from the drop-down menus.
Time
Select the current hour, minutes, and time of day fro the drop-down menus.
Automatic Time Adjustment (NTP)
Enable NTP
Check this box to enable Network Time Protocol.
NTP Server
Address or Host
Name
Enter the NTP server's IP address or host name, then click Sync.
Example: north-america.pool.ntp.org
NOTE:
Make sure DNS servers are
defined if using Hostname for NTP server.
Time Zone
Select your time zone from the drop-down menu.
Adjust Clock for Daylight Savings Time (DST)
Enable DST
Check this box to have the Remote Power Switch (DC) observe Daylight
Savings.
Start Day
Select the month, weekday, and time when Daylight Savings will begin.
End Day
Select the month, weekday, and time when Daylight Savings will end.
