21
Edit Menu Field Descriptions
8.2
8.2.1
System
From the
Edit
>
System
menu, you will configure global system and DCP settings. You can also
resent the unit to factory defaults, backup your configuration, or upload an existing configuration file.
The Edit > System menu
Global System Settings
Name
A name for this Remote Power Switch (DC). (Optional field)
Location
The location of this Remote Power Switch (DC). (Optional field)
Contact
Contact telephone number for the person responsible for this Remote Power Switch
(DC). (Optional field)
"From" Email Address
A valid email address used by the unit to send email alarm notifications
SNMP Get String
Community name for SNMP requests
SNMP SET String
Community name for SNMP SET requests
*User
Used to change the username for logging into the unit.
*Password
Used to change the password for logging into the unit (case-sensitive).
Web Server Type
Select HTTP (port 80) or HTTPS (port 443)
DCP Responder Settings
(For use with T/Mon NOC)
DCP Unit ID
User-definable ID number for this Remote Power Switch (DC) (DCP Address).
Listen DCP
Choose to listen DCP over LAN or serial. May also be disabled.
DCP LAN
Enter the DCP port for this Remote Power Switch (DC) (UDP/TCP port).
Expansions
Select '1' ONLY if you are using a secondary Remote Power Switch as an
expansion unit
System Controls
Initialize Configuration
Used to restore all factory default settings to the Remote Power Switch (DC). Do
not initialize the non-volatile RAM (NVRAM) unless you want to re-enter all of your
configuration settings.
Backup Configuration
Saves your current configuration to a .bin file
Restore Configuration
Clickable link that takes you to the Firmware Load screen, where you'll browse to
the config file you've saved on your PC
Field descriptions for the System Menu
