FAM SROxG Nav key rev 10-14.doc
11/14
A-27
OVEN MAINTENANCE AND CLEANING
WARNING
: Always disconnect the power supply to the appliance before cleaning,
doing preventive maintenance or servicing.
Questions
Solutions
Clean the inside of the oven proofer with
water and soap.
We recommend to use Stainless steel oven
cleaner
Clean the oven exterior with a stainless steel
cleaner.
We recommend and sell:
Stainless steel cleaner
SANY or CURTIS (comestible)
Part number : NES201
MAINTENANCE OF THE BURNER
Every three months verify and clean the burner air inlet in order to remove dust and
particles. (Refer to page A-4)
Once a year, you should ask a certified technician to make a tune up.
Make sure everything works properly, verify and clean especially:
1.
Clean the air inlet of the control and burner compartment
2.
The in-shot burner.
3.
Inspect and clean both burners electrodes
4.
Verify the burner input and output pressure.
5.
Verify proper operation of flue gas damper and draft inducer.
6.
Verify Steam Generator bars, distribution pan and drain pan for scale build up. If needed, let
them soak in a descaler solution or vinegar. Then rinse prior to installation.
