FAM SROxG Nav key rev 11-14.doc
11/14
A-15
PROGRAMMED COOKING MODE
This mode is used to work with 1 to 8 stages recipe programs.
To select a programmed recipe, u Use navigation key until name or number of product is highlighted. Press
to
select product program. The oven will preheat to the programmed temperature. Display will show READY and the alarm
will beep 5 times when the oven is at the desired temperature.
Press on START/STOP key to start the programmed recipe. The timer will countdown. At the end of the recipe, display
will show BAKE DONE. If needed, you can add time pressing the BAKE MORE TIME key. It will automatically add 1
minute without changing the original time setting. If more then one minute is needed after pressing the BAKE MORE
TIME key, Use navigation key to select desire time and press
when the countdown is finished, the display will
show BAKE DONE. Press on START/STOP key to stop the recipe.
Also, at any time during the countdown, the recipe can be paused by pressing on the START/STOP timer key or
canceled by pressing and holding the key for 3 seconds.
When the door is open, the timer pauses Rack will index and drop down to floor, the display shows DOOR OPEN until
the door is closed.
To see current stage information during baking process, press on the TIMER key. It will display recipe name, stage
number, stage status and time reminder.
Note : During a programmed recipe, the keys SHOT & PULSE STEAM, FAN OFF DELAY are not functional. All
those functions need to be set in the recipe program.
Rack is always rotated when oven is powered, when door are opening the rack will automatically
index with the door opening and drop down to load or unload the rack. If desired Rack can be stop
and index during baking by pressing the RACK key.
To restart the rack press again on the RACK key or after opening the door and closed back the rack
will start rotating in normal mode.
Cook Program Structure
Each recipe name can have maximum of 15 characters. Up to 10 characters will show a fixe recipe name on the display.
If more then 10, the recipe name will scroll on the display and when timer is activate the recipe name will be fixe and
show only the 10 first characters.
Each recipe can have preheat temps, cook stage, cook & hold function. Each stage has the following programmable
parameters :
Time: the time duration of the current stage.
Oven temperature: the oven set point for current stage.
Steam: shot or pulse steam injected into the oven chamber.
Fan off delay: 0 to 3 minutes can be programmed after the shot steam injection.
Fan off delay: duration of the fan OFF
Fan speed: SRO2=STD/HIGH or SRO1=STD /LOW
Vent opening: vent opening delay during stage.
Entering the Programming mode
Press the PROGRAM KEY
. If the control is protected by a password. The display reads ENTER CODE. Use
navigation key to enter the 4 digits code. Select the number and press
to go to the next number. After the last
number confirmation, you will enter program mode.
RACK FUNCTION
