A-6
1.
Turn the switch to the position "ON".
2.
Adjust the thermostat at the desired temperature (see THERMOSTAT INSTRUCTIONS below).
3.
Adjust baking time according to your product. Use the up and down arrows on the speed control
to set your baking time.
(see suggestions in the tables next page.)
N.B. The thermostat display must be "ON" (If not, press the breaker on the front)
4.
Heat the unit until you reach the baking temperature.
When the desired temperature is reached, the red light ON goes out on the thermostat.
•
If the red light on the front control panel is "ON" and the alarm buzzer rings, the oven does not
produce heat. To start it over, press the red button on the front control panel for 2 seconds. The
burner will start up (you can hear it). You can repeat this operation three times. If it does not
start up again,
contact our company or a certified gas technician.
5
Place your products on the conveyor.
We recommend to use perforated pan or pizza screen.
6 To stop the oven, just turn the selector switch to "OFF" position. If the control compartment is too
hot, the cooling fan will run until the temperature drops.
THERMOSTAT INSTRUCTIONS
To obtain a very good thermal stability, we use a digital temperature controller with thermocouple.
The Omron E5CS thermostat controls the heat at the SP (set point).
The temperature of the oven is always shown on the display of the thermostat and an arrow indicates
if the temperature is over or below the SP. When the green light is lit, it indicates that the temperature
is at the SP ± 1 %.
To adjust the SP value, you just have to press the key on the left and use the up and down keys to set
temperature and alarm value. Press the left key to return to run mode.
OPERATION / INSTRUCTION
Summary of Contents for FC18G
