BTF080/ BTF100/ BTF120/ BTF140-E1R2
Page 28
CHAPTER 7
MAINTENANCE
WARNING:
BEFORE EVERY CLEANING OR MAINTENANCE OPERATION, CUT OFF THE POWER BY
THE MAIN SWITCH AND DISCONNECT THE ELECTRIC PLUG FROM THE CURRENT TAP.
When doing potentially dangerous operations such as refinements, maintenance, dismantling, electric,
mechanical or pneumatic component replacements, etc, the user must be sure that the plug is pulled out.
During and after any operation in which one or more security systems have been dismantled, it is forbidden to
put the machine into use until these protections are correctly installed again.
CAUTION
: Internal mechanical components can involve some risks. Use appropriate protection gloves to
handle them.
7.1.- WHEN THE MACHINE IS NEW
When the machine is new, it is strongly advised to test it with ingredients that will not be used for human
consumption before starting production.
This way, any waste caused by shipping, installation and tests will be removed.
7.2.- EVERY DAY
7.2.1.- CLEANING
The machine must be cleaned every day, especially the parts that are in contact with the product.
Do not use knives, striking surfaces or metallic and hard objects while cleaning the machine, it could damage
it. Instead, you should use a vacuum cleaner, smooth clothes or sponges.
Do not use toxic products, solvents, irritants, abrasives or any products that could damage the surface or
contaminate the product.
This period may be adjusted depending on the machine’s use frequency.
7.3.- EVERY SIX MONTHS
7.3.1.- CHECK THE BELTS
Belt stretching should be done by authorised and trained personnel. In order to reach the zone where the
upper cover is, use a step-ladder which complies with the safety standards, or any other lifting equipment
complying with the standards and legislation.
