background image

AEF-A.DOC

02/2003

11

 

DOYON SPIRAL MIXER AEF 035/050/080/100/120

4.1 – GENERAL CHARACTERISTICS

Electric commands come with two modes: manual and automatic mode
When in stand by, the displays shows four bars:

 

50 Different Programs capacity

 

In each program you may adjust the time of work for the 1

st

 and 2

nd

 speed

 

Initial program is P1

MODEL

number

NEMA

Plug configuration

AEF015

L15-20P

AEF035

L15-20P

AEF050

15-30P

AEF080

15-50P

AEF100

15-50P

AEF120

15-50P

4.2 – ELECTRIC INFORMATION

 

Electrical supply installation must be in accordance with the electrical rating on the
nameplate.

 

The plug must be as near as possible of the machine and easily accessible.

4.3 – START

1.

 

Turn the general switch into position I, and verify if the Emergency Stop is unlocked and
the points 2 and 3 will display (4bars _ _ _ _).

2.

 

If the red emergency STOP button is pressed, you must turn the button as shown by the
arrows.

3.

 

Close the safety bars (point 3, fig.3).

4.

 

Press “POWER” (point 1, fig.4), the time display (point 2 and 3, fig.4) will display
“0.00”.

5.

 

The machine always starts in manual mode.

6.

 

Press the green button I (point 15, fig.4).

7.

 

Verify if the bowl and spiral rotations are the same as indicated by the arrow on the
spiral. If not, stop immediately the machine, unplug it, open the electric plug and reverse
one phase for another.

8.

 

When the machine starts working, verify if the protection bars work correctly, when you
lift it, the machine must stop. If not, contact a technician.

Summary of Contents for AEF 035

























Reviews: