AEF-A.DOC
02/2003
9
CHAPTER 4
DOYON SPIRAL MIXER AEF 015
4.1 – ELECTRIC INFORMATION
•
NEMA configuration L15-20P.
•
Electrical supply installation must be in accordance with the electrical rating on the
nameplate.
•
The plug should be near the machine and easily accessible.
4.2 – FIRST START
1.
Turn the selector switch into position I (fig 2).
2.
Close the safety bars (point 3, fig.3).
3.
Verify if the red emergency STOP is not pressed (fig.2). If it is, you must turn the button
as shown by the arrows.
4.
Press the green button and verify if the bowl and spiral rotation is the same as indicated
by the arrow. If not, stop immediately the machine, unplug it, open the electric plug and
reverse one phase for another.
5.
When the machine starts working, verify if the protection bars work correctly. If not, stop
it, unplug it and contact a technician.
6.
When the machine is new, you should, before starting production, try it with some
dough. This will remove the lubricator’s residuum, that may remain in the bowl and on
tools.
Summary of Contents for AEF 035
Page 22: ...AEF A DOC 02 2003 21...
Page 23: ...AEF A DOC 02 2003 22...
