AEF-A.DOC
11/2011
14
GETTING STARTED :
•
Supply the machine according to the plate specifications
•
Turn the main switch into position I
•
Verify if the Emergency STOP button is unlocked
•
All displays stay ON during 2 seconds displaying number “8”
•
All led stay ON during 2 seconds
•
Simultaneously is emitted a continuous beep (during 2 seconds)
•
The mixer will be on Stanby Mode
•
Press the button and the displays will light up. You will be on Manual Mode.
•
Press the green button .
•
Verify if the bowl and spiral rotations are the same as indicated by the arrow on the spiral.
If not, stop immediately the machine, unplug it, open the electric plug and reverse one
phase for another.
•
When the machine starts working, verify if the safety guards work correctly, when you lift
it, the machine must stop. If not, contact a technician
.
•
After that, push the Start button , the machine will restart. Then, press the red button
to stop the machine. If it doesn’t stop, pull the emergency stop, unplug it and call a
technician.
When the machine is new, you should, before starting production, try it with some dough.
That will remove the lubricator’s residuum that may remain in the bowl and on the tools.
4.4.- MANUAL OPERATION (MANUAL MODE)
•
If in Standby Mode, pulse button .
•
Close the safety guards. If you lift up the safety guards, the machine will stop immediately.
•
The machine always starts working in Manual Mode.
•
Use button
to change speed. Display B shows speed “I” or “II”.
•
To start and stop the mixer, use buttons and .
•
To change speed “I” to speed “II”:
At any moment, pulsing button , speed “I” stops, and after a pause of 1 second, speed
“II” starts.
In order to change from speed “II” to “I”:
Stop the machine by pulsing button 6;
Pulse button to change display B from “II” to “I”.
Pulse button to restart the machine.
•
To count and visualize the operating time:
Display A indicates the elapsed time at speed “I” in progress.
After switching from speed “I” to “II”, display A adds the elapsed time speed “I” to
elapsed time speed “II” in progress.
Display D and E indicate the current elapsed time for speed “I” and speed “II”
respectively.
•
At any time, it is possible to stop the machine by using the emergency stop.
