Dovre 750 GA, Installation Instructions And Operating Manual

Page: 19 / 30

wijzigingen op grond van technische verbeteringen voorbehouden
19
1.6 Outlet protection
On replacement, only use the original thermal switch, not alternatives. The thermal switch
holder can be removed by unscrewing the two self-tapping screws on the rear wall.
Possible causes for the activation of the outlet protection include:
A bad connection between the stove and the outlet flue.
The outlet flue is wholly or partly blocked by falling debris or similar.
Flue draught is too weak.
An open kitchen with an excessively powerful cooker hood.
2 Instructions for use
Warning: After installation we recommend running the appliance for several hours at
the highest setting with good ventilation, to give the paint a chance of hardening. White
deposits on the glass and the interior may occur during this initial period. This deposit can
be wiped off with a dry cloth once the appliance has cooled down.
The appliance has two burners. The rear burner is controlled by the thermostat knob. You
select the position you want and the controlling thermostat sets the correct temperature.
The front burner is controlled by the hand tap. You choose the position you want and the
burner stays in that position until you change it.
The following parts of the appliance are considered "operating surfaces" and can
therefore reach high temperatures:
• all cast iron components
• the heat exchanger
• the glass surface.
We recommend placing an additional screen around the appliance if children or older
people are present.
Ignition button
Thermostat
Manual control for
effects burner