Dovre 2180CBBS, Installation Instructions And Operating Manual

Page: 38 / 182

2. Unlock the door by turning the two locks above the
door inward; see next figure.
During transport both the door and the
counterweight must be blocked.
Dismantling baffle plate
The baffle plate consists of two parts (A) and (B); see
next figure.
1. Open the door of the appliance with the cold
handle.
2. Lift part (A) from the projections on the front side
and then from part (B).
3. Tilt part B from the ridge at the back.
4. Take both parts out of the appliance through the
door.
Note : To fit the baffle plate, follow the steps set out
above in the reverse order.
Adjusting the damper position
The appliance fitted with a damper operated by a
damper rod. The position of the damper regulates the
efficiency of the stove: the more accurately the
damper can be adjusted, the higher the efficiency.
When the door is opened and closed, the damper is
opened and closes by means of the damper rod. The
position of the damper depends on the draught in the
chimney. When the door closes, the damper is
automatically moved into the right position.
In model 2180CBGD the damper rod must be pushed
in with the cold hand (A); see next figure.
When the door is closed, the damper can be opened
by pushing the damper rod in a little and then moving it
to the left; see next figure.
8
Subject to change because of technical improvements