Dovre 2180CBBS, Installation Instructions And Operating Manual

Page: 36 / 182

Floors and walls
The floor on which the appliance is placed must have
sufficient bearing capacity. For the weight of the
appliance, see the appendix "Technical data".
There may not be any electrical wires in the
floor below the appliance and in the walls
around it.
All flammable materials must be removed from
under the appliance or protected by at least a 6
cm concrete slab.
Flammable walls bordering the appliance must
be protected by at least a 10 cm stone wall and
5 cm insulation.
Protect non-flammable walls bordering the
appliance with at least 2.5 cm insulation to
avoid cracking.
Protect a flammable floor from heat radiation
and falling ash by means of a fireproof
protective plate. See the appendix "Distance
from combustible material".
Keep enough distance between the appliance
and combustible materials such as furniture.
Ensure sufficient ventilation around flammable
materials such as a mantelpiece. See
appendix "Distance from combustible
material".
Carpets and rugs must be at least 80 cm away
from the fire.
Do not place any flammable materials within
50 cm of any convection outlets.
Product description
1. Connection collar
2. Damper
3. Latch
4. Damper operation
5. Primary air slide
6. Secondary air slide
7. Door
8. Bottom of the fire compartment
Features of the appliance
The appliance is fitted with a removable fire plate,
log retainer and fire plate.
Cast iron inner plates protect the combustion
chamber and dissipate heat to the
environment.
The appliance comes standard with a connection
kit for the outside air supply.
The appliance has a connection collar which can
take a vertical connection as well as a 45°
connection.
The appliance is supplied with a separate handle
(A) , the so-called 'cold hand', for opening the door;
see next figure.
6
Subject to change because of technical improvements