Dover Vitronics Soltec DeltaWave 6622cc, Installation Manual

Page: 20 / 33

I
NSTALLATION
12
C
HAPTER
1
1.4 S
TARTING UP
1.4.1 I
NSTRUCTIONS
STARTING UP IS ONLY ALLOWED BY QUALIFIED PERSONNEL
BEFORE STARTING UP, START UP THE FOLLOWING PROCEDURE:
1. Open the N
2
/Air valve. Adjust the pressure on 6 bar maximum for air and 5 bar for N
2
.
2. Take off the padlock on the mainswitch and switch on the mainpower.
3. Switch on the PC and monitor.
1.4.2 F
UNCTIONS
The PC will start up (if already setup) the PC program. If not installed please install the PC pro-
gram as described in the User manual, chapter 3.
1. Reset E-stop. This can be done in the RESET MENU. Check if all E-stops are resetted and
that the wirebridges are made where necessary.
2. Test all sensors on the PLC module. (Only when first installed).
3. Back to STATUS MENU. Test all functions.