T
RITON
S
YSTEMS
9640-
TO
-9600
C
ONVERSION
P
ROCEDURE
4
3.
Using a medium flat-blade screwdriver, remove the
screws that secure the inner slide members to the
left and right brackets on the 9640 dispenser. Retain
the slides for a later step.
Remove three screws that secure each slide
member to 9640 dispenser chassis.
Press release tabs and remove 9640 dispenser
from cabinet slides. Use a two-person lift!
Slide Release Tab
REMOVE 9640 DISPENSER
1.
Slide the 9640 dispenser out on its rails. Turn the
dispenser power switch to the OFF (O) position and
disconnect the power cord. The power cable
connector is located next to the power switch, in the
top front area of the dispenser. Disconnect the data
cable at the connector located on the left side of the
dispenser.
2.
Press the release tabs located on each slide and
remove the dispenser from the cabinet. Warning:
Two persons should be used to remove it from
the ATM cabinet!
Disconnect EJ-to-Mech Data Cable
Turn dispenser power OFF and
disconnect power cable.
