PAGE 20
340 REV.991125
RECOMMENDED MAINTENANCE
In order to maintain the PULLMASTER Planematic drive in peak operating condition at all times, it is
recommended that the following preventive maintenance procedure is carried out every 12 months or 500
operating hours, whichever occurs first.
1)
Disconnect all hydraulic connections and remove the Planematic drive from its mounting.
2)
Disassemble the Planematic drive in accordance with the SERVICE INSTRUCTIONS.
3)
Discard and replace all O-rings and oil seals.
4)
Inspect all parts for wear and replace if necessary.
5)
Clean all parts thoroughly with solvent before reassembly.
6)
Follow INSTALLATION and OPERATING INSTRUCTIONS when returning Planematic
drive to its mounting.
When ordering parts for the PULLMASTER Planematic drive, always quote the complete model and serial
numbers of the unit.
MODEL NO.
_____________________
SERIAL NO.
_____________________
PULLMASTER WINCH CORPORATION reserves the right to change specifications and the design of
PULLMASTER Planematic drives at any time without prior notice and without incurring any obligations.
