PAGE 1
SAFETY RECOMMENDATIONS
338 REV.990801
FAILURE TO COMPLY WITH THE FOLLOWING SAFETY
RECOMMENDATIONS AND LOCAL RULES AND
REGULATIONS COULD RESULT IN PROPERTY
DAMAGE, SEVERE INJURY OR DEATH.
WARNING
1.
Do not install, operate or service Planematic drive before reading and understanding manufacturer's
instructions.
2.
The Planematic drive described herein is not designed for operations involving lifting or moving
personnel.
3.
Do not lift or carry loads over people.
4.
Do not exceed recommended operating pressure (psi) and operating volume (gpm).
5.
Do not jerk the Planematic drive. Always smoothly accelerate and decelerate load.
6.
Do not operate a damaged, noisy or malfunctioning Planematic drive.
7.
Do not leave a load suspended for any extended period of time.
8.
Never leave a suspended load unattended.
9.
The Planematic drive should be maintained and operated by qualified personnel.
10.
Inspect Planematic drive mounting bolts and hoses before each shift.
11.
Warm up equipment before operating Planematic drive, particularly at low ambient temperatures.
12.
Do not weld any part of the Planematic drive.
13.
Verify circulation return before operating Planematic drive.
14.
Ensure equipment stability before operating Planematic drive.
15.
Wear proper clothing to avoid entanglement in rotating machinery.
16.
Always stand clear of the load.
17.
Use only recommended hydraulic oil.
18.
Keep hydraulic system clean and free from contamination at all times.
19.
Maintain Planematic drive and equipment in good operating condition. Perform scheduled maintenance
regularly.
20.
In case of a power failure or breakdown leading to an unexpected stop of the hydraulic power circuit,
stand clear of the area and the load being hoisted. Take the necessary precautions to prevent access
to the area where the load is halted.
21.
The noise level of the Planematic drive is 86 dBA measured on a distance of 1.00 meter, 1.60 meters
high. The measuring equipment used was: Realistic #42-3019.
22.
Clean up any oil spillage immediately.
23.
Wear proper clothing and personal protection equipment such as footwear, safety goggles and a hard
hat. Read manual first.
