manualshive.com logo in svg

Dover OPW SiteSentinel Nano M2012, Operator'S Manual, Page: 10 / 49

Share
Download
Dover OPW SiteSentinel Nano M2012 Operator'S Manual Download Page 10

1.5 Links to Instructional Videos

This manual includes web links and QR codes that link directly to the OPW training video “Configuring an
OPW Nano Tank Gauge via the TCP/IP Port, VNC Viewer and a Laptop” found on the OPWGlobal channel
on YouTube.

This code and link will take you to the full video:

This manual includes web links and QR codes that link directly to the OPW training video “Nano Operator
Guide” found on the OPWGlobal channel on YouTube.

This code and link will take you to the full video:

The Introduction section of the video will show you how to setup and view the configuration screens using a
laptop.

The QR codes and links that accompany various sections in this manual will take you directly to the portion of
the video that is related to that manual topic.

NOTE:

The QR codes and web links to videos in this manual are set to start the video at the

appropriate spot for the topic where it is introduced. The video will continue to play till the end.
You have the option to manually stop the video at the end of the topic or continue playing.

Doc. No.: M2012 Rev.: 3

Page 10 of 49

Summary of Contents for OPW SiteSentinel Nano M2012


















































Reviews:

No comments