T h e M o b il e C h o ic e f o r y o u r B r o a d b a n d I n t e r n e t
Menu System
9
© 2015 Dovado FZ-LLC
only an APN might be sufficient. If not, then please contact your operator.
My L.I.M modem requires a username and password for its web admin pages
This setting is needed if your USB modem requires Username Password to access its GUI
Enable DMZ settings on ZTE modem to support Port Forwarding
This settings needs to be enable if you have a ZTE modem with WEB GUI support and want to do
portforward
Let router set connection options and APN on L.I.M (Mobile hotspot)
If you enable this setting the router will be able to alter settings such as APN and connection mode
on your Mobile Hotspot
PPP and Network Settings
Alter advanced PPP and network settings such as timeouts and IP packet transfer size
PPP settings
Here you can fine-tune your mobile Internet connection.
PPP Idle Timeout
PPP Echo timeout
The PPP echo timeout value, this value is normally 60 seconds
PPP Echo count
The PPP echo counter value, this value is normally 3 seconds
Modem Call string
(3G: *99#, CDMA: #777)
Network Settings
Here you can alter the settings regarding your network connection
Load preset
Predefined profiles for different networks types.
WAN
MTU
Change the Maximum Transmission Unit
MRU
Change the Maximum Maximum Receive Unit
Enable MSS Clamping
Enabling MSS clamping will force the clients to use a certain MTU
3.2.4
WAN
The default setting is that your operator automatically will allocate you an IP address. Should your
operator have given you a static (specific) IP address, then select Manual (Static) settings and fill in
the given information in the relevant fields.
WAN IP Configuration
Automatic/Dynamic (DHCP)
Should your operator have given you a dynamic IP addresses, then select the Automatic/Dynamic
(DHCP) setting.
Manual (Static)
Should your operator have given you a static (specific) IP address, then select the Manual (Static)
settings and fill in the given information in the relevant fields.
PPPoE
Should your operator use PPPoE to give you a IP address, then select the PPPoE settings and fill
in the given information in the relevant fields.
Advanced Network Settings
Alter advanced network settings such as timeouts and IP packet transfer size
MTU
Change the Maximum Transmission Unit
MRU
Change the Maximum Maximum Receive Unit
Enable MSS Clamping
Enabling MSS clamping will force the clients to use a certain MTU
