Description & Function
Liquid Crystal Display Panel (LCD)
1. Device Name
2. Delay ON Time
3. Delay OFF Time
5. Action
4. Occupancy
6. Function of Selected Device
7. Channel Number
8. Address
9. Input Type
10. Input Component Number
11. Cursor
The device that you are programming. Available devices are:
1-4 Button Switch, 8 Button Switch, Dimmer Switch, 8-Contact
Input, Key Switch, PIR Occupancy Sensor and Photo Sensor.
Sets a switch’s function. Options are: ON only, OFF only,
Toggle (ON and OFF), Dim Up, Dim Down. Sets the Contact
Input Units function to correspond to the Contact-type that is
connected to its terminals.
Output channel to be programmed.
Sets the Address for the device being programmed.
Input to target: Individual, Group, Local Preset, Global Preset,
Indiviual Dim, Group Dim.
The input component of a device being programmed
(multiple button switch or 8-Contact Input Unit).
Indicates a selected item.
Number of seconds an ON command is delayed after being
activated. Minimum 0 Seconds - Maximum 40 minutes.
*When ‘Occupancy PIR’ is the device selected, this field will
indicate the level of sensitivity to apply (from 0-10)*.
Number of seconds an OFF command is delayed after being
activated. Minimum 0 Seconds - Maximum 40 minutes.
The action to be performed by the IR Setting Unit. READ
(Reads current settings from a particular device), WRITE
(Writes the current settings on the LCD screen to a particular
device), CLEAR (Clears all settings associated with a device),
OFF (Turns the IR Setting Unit Off).
Indicates whether occupancy sensor connected will use
default manufacturer settings for time delay (NO) or time
delay as set by the IR Setting Unit (YES) *for 8-Contact Input
Unit only*.
universaldouglas.com
PAGE 4
