
Setting a Photo Sensor
Setting a Photo Sensor
Step 1 -
Photo Sensor Selection
Step 4 -
Writing Programming to a Photo Sensor
Step 2 -
Photo Type
Step 3 -
Assigning an Address
Using the UP/DOWN buttons, move the cursor until it highlights the ‘Photo Sensor’ field.
Using the UP/DOWN buttons, move the cursor until it highlights the ‘Type’ field. Select the
input type (Local Photo and Global Photo) to apply to the sensor that you are programming
by rotating the scroll wheel clockwise or counterclockwise.
Using the UP/DOWN buttons, move the cursor until it highlights the ‘Addr’ field. Select
the address you wish to assign the sensor by rotating the scroll wheel clockwise or
counterclockwise.
Using the UP/DOWN buttons, move the cursor until it highlights the bottom right field.
Rotate the center scroll wheel until ‘Write’ is highlighted. Point the Infrared transmitter
approximately 0.5” away from the IR lens of the sensor being programmed and press the
center button of the IR Setting Unit. You will hear a single solid beep sound indicating that
the switch was successfully programmed.
universaldouglas.com
PAGE 10