background image

the return fitting for a while until all air has been pulled
from the element in the normal filtering cycle.  Continu-
ous air flowing out of the return fitting means that you
have loose hose connection between the pump and
filter, or that the hose adaptor on the pump suction is
loose.  Tighten if necessary.  Check for any leaks where
skim filter is attached to wall and tighten screws (25) if
necessary.

FIRST-TIME FILTRATION

Your skim filter will work extra hard to clean new,
unfiltered water during the first days of operation.  If you
can easily see the bottom of your pool through clear
water, you may not need to clean the filter element for
several days to a week.  However, slightly cloudy pool
water may require daily cleaning for the first few days.
Discolored water that appears greenish, grey-blue, or
reddish may contain a heavy  load of algae spores,
suspended minerals, or super-fine particles.  This is a
severe condition that rapidly "blinds off" the fibers of the
element filtering cloth, cutting off water flow through the
element.  When the element blinds off, little or no water
is returned to the pool through the return fitting opening.
This could occur repeatedly, requiring that you clean the
element many times in one day, until all pool water is
thoroughly cleaned by the filter.  After the filter has
successfully cleaned the newly filled pool, you can
expect many days to a few weeks of excellent filtering
between each element cleaning.  Cleaning cycles will
depend on the size of your pool, amount of water being
filtered, airborne debris, and degree
of pool use.

ROUTINE CARE & MAINTENANCE

KEEP YOUR POOL SPARKLING

You can take steps to reduce the amount of mainte-
nance needed to keep your pool sparkling.

1.

Provide a clean walkway  leading to your pool
entrance.

2.

Rinse off patio and area around pool regularly.

3.

Swimmers should rinse off (especially their feet)
before entering pool.

4.

Maintain the proper chemical balance in your pool.
Hot days will cause chemicals to dissipate rapidly.

5.

Remove floating leaves and debris with a leaf
skimmer.

6.

Empty skimmer basket frequently.

7.

Vacuum pool bottom to remove settled debris.

8.

A pool cover will help keep your pool clean during
high winds or rainfall.

POOL CARE

Refer to your "SAFETY FIRST Pool Use Handbook" for
general pool care and chemical treatment information.
This booklet is included in your pool package.

4

CHLORINE INSTRUCTIONS

ALWAYS READ AND FOLLOW CHEMICAL

 MANUFACTURER'S SAFETY PRECAUTIONS

FOR HANDLING CHLORINE

WARNING!  DO NOT PLACE CHLORINE TABLETS IN
THE SKIMMER BASKET! 
Putting chlorine tablets
directly into the skimmer basket will destroy the filter
element.  Chlorine in high amounts eats away the
material and will in time destroy the filter element.  We
recommend against adding any kind of chemicals
directly into the skimmer!

Please read the following instructions carefully.  Chlorine
is a strong chemical.  Improper use could result in
serious, permanent damage to the pool liner.  This
damage could include "white spots", wrinkles or
breakage (brittle vinyl).  Such damage is not covered
under warranty.

IMPORTANT:  Pump and filter should always be "ON"
when adding any chemicals to pool water.

WITH DISPENSER
Dry Chlorine 
(tablets, sticks, granules, or powder).  Use
one of the following types of chlorine dispensers:

•  Floating Dispenser:  Use only when pump and

filter are running.  Dispenser must circulate in pool
for proper distribution of chlorine.

•  Automatic feeder (in-line or off-line).
•  Chlorine generator - Approved for use.

Releases chlorine from salt.

Ask your Doughboy dealer to recommend the best type
of dispenser for your pool and area conditions.  Follow
manufacturer's instructions for correct use.

WITHOUT DISPENSER
Dry  Chlorine:
  Use granules or powder only.  NEVER
pour dry chlorine directly into the pool water.  Mix with
pool water in a clean plastic container following chlorine
manufacturer's safety instructions.  When all chlorine
has dissolved, pour solution into pool water at the return
fitting.  Water returning to the pool will properly distribute
chlorine.

Liquid Chlorine:  Liquid chlorine concentrate may be
poured directly into pool water.  Carefully add liquid
chlorine to water at the return fitting.  Water returning to
the pool will distribute the chlorine.  Follow chemical
manufacturer's instructions for use of liquid chlorine.

EMPTY SKIMMER BASKET

Stop pump.  Remove lid (1).  CAUTION:  Before lifting
out basket and emptying, check inside opening above
basket for "STILL ALIVE" insects such as hornets, bees,
etc., that may sting you.  Then slowly lift out basket and
empty. Replace skimmer basket and lid.  Start pump.

Summary of Contents for 0-1120-000









Reviews: