Dot Origin VTAP 100, Basic Configuration Manual

Page: 3 / 31

Contents
1 Using this guide 1
2 How VTAP100 works 2
2.1 Configure VTAP100 3
2.2 Default operation on factory settings 4
3 Start reading your own passes 5
3.1 Edit config.txt 8
3.2 Send pass data as keyboard emulation over USB 9
3.3 Extract only part of the pass data 10
3.4 Control LED and buzzer feedback 13
4 Read cards or tags 14
4.1 Extract only part of the card or tag data 15
5 Connect to other systems 17
5.1 Send pass data over a virtual COM port 17
5.2 Using VTAP100 with Read-a-Card software 18
5.3 More advanced features 19
6 Maintenance features 21
6.1 Check status in BOOT.TXT 21
6.2 Update firmware 22
6.3 Software lock to prevent local firmware or configuration change 22
6.4 Hardware lock to disable USB mass storage device
23
6.5 Hardware reset to use factory firmware 25
6.6 Reboot, remount, refresh commands 25
A Default Config.txt file A-1
BASIC CONFIGURATION GUIDE PAGE I