13
12
Index
1. Introduction
13
2. Kindly note
13
3. Delivery contents
13
4. Usage
13
5. How to use device
5.1
Device description
14
5.2
Start-up device
15
5.3
Factory presets
15
5.4
Functions
15
5.4.1 Measuring unit switching
15
5.4.2 Calibration
15
5.4.3 Display HOLD MAX MIN AVE
16
5.4.4 19-Measurements memory
16
5.4.5 AUTO-OFF-function
16
5.4.6 Measuring channel 2 off/on switch
17
5.4.7 Display difference temperature (T1-T2)
17
5.4.8 Display Ohm/Millivolt
17
5.5 USB-Connection
17
5.6
Battery replacement / Battery status indication
18
6. Technical data
18
7. Explanation of symbol
19
8. Waste disposal
19
9 Storage and cleaning
19
1. Introduction
Dear Sir or Madam,
Thank you very much for purchasing one of our products. Before
operating the data logger please read this manual carefully.
You will get useful information for understanding all functions.
2. Kindly note
• Check if the contents of the package are undamaged and
complete.
• Remove the protection foil above the display.
• For cleaning the instrument please do not use an abrasive
cleaner only a dry or moist piece of soft cloth. Do not allow any
liquid into the interior of the device.
• Please store the measuring instrument in a dry and clean place.
• Avoid any force like shocks or pressure to the instrument.
• No responsibility is taken for irregular or incomplete measuring
values and their results, the liability for subsequent damages is
excluded!
3. Delivery contents
• Measuring instrument
• Operating instruction
• Calibration report
• Battery 2x AA size 1,5 Volt (already inserted)
4. Usage
The instruments of P4000 series are suitable for temperature
measurements with an external sensor. Areas of application depends
on the probe (the probe is not included with the instrument):
• Air (gasiform media)
• Water or similar media (liquids)
• Semisolid media (with penetrationprobe)
• Surface
