9
doerr-outdoor.de
02 | PRODUCT DESCRIPTION
·
Multifunctional
work light
for car & workshop
·
Rubberised, 360° rotatable clamp brackets
, extendable from
1.20 to 2.20 m
·
2 brightness settings (100%, 30%)
·
Cordless operation
·
Built-in
lithium-ion batteries
, rechargeable via supplied
charger
·
Robust
plastic housing
03 | PRODUCT DESCRIPTION
01
Clamping brackets
02
Release buttons
03
Rubber cover
04
Charger connection socket
05
LED charging and capacity indicator
06
On/Off button
07
Rotatable LED cover
08
Charger
04 | COMMISSIONING
04.1 Charging the built-in batteries
Before using the work light for the first time, fully charge the built-in Li-Ion batteries using the charger (08) supplied:
Open the rubber cover (03). The connection socket (04) for the supplied charger is underneath it. Connect the charger (08) to the
connection socket (04) and to a power supply socket. During the charging process, the LEDs to indicate charging and capacity (05)
flash
blue.
After approx. 3 hours, the built-in Li-ion batteries of the work light are fully charged and all 4 LEDs of the charging and capacity
indicator (05) show a
solid
blue light. Remove the charger (08) and disconnect from the power supply. Close the rubber cover (03).
ATTENTION!
Do not leave the light unattended during charging. After charging, disconnect the lamp from the power supply. Only use the
charger supplied to charge the lamp.
