51
LEADING IN PRODUCTION EFFICIENCY
Operating Manual
© Dürr Systems AG
ED3K_Operating_Manual_Rev02LD_03Lug2020_EN. docx
Rev.02 – 03.07.2020
When the key “Recipe mode on/off” is green the system is in
Recipe mode
. In this mode the
operator can change the recipe in use and start the cycle programs.
Login with a level 3password, tap on the button “Recipe mode on/off“ to leave the Recipe mode
and enter the
Manual mode
. The button “Recipe mode on/off” becomes grey color and the manual
mode icon is shown on the top left corner. This mode is reserved to maintenance technician to
command the valve individually to test component efficiency. Tap on the button again to leave the
manual mode and enter again the Recipe mode.
When the system is in recipe mode, login with a level 1 or higher password , tap on the button “Ext.
Recipe mode on/off” to enter the
External Recipe Mode
. The button becomes green color and the
external recipe mode icon is shown on the top left corner. In this mode the machine is controlled
by an external controller with command sent through the ethernet port in ethernet UDP protocol.
Select active spray guns
If the system is equipped with two guns is possible to activate each gun individually. Once the
system is purged, tap on the button of the gun you want to enable or disable. The enabled buttons
of the guns are greencolor. Cycle programs, as load and purge, are activated only on enabled guns.
Use the “back button”
to close the window.
