Doro PHONEEASY 505 Manual Download Page 7

Page: 7 / 48

English

Charging

CAUTION

Only use batteries, charger and accessories that have been approved for

use with this particular model. Connecting other accessories may be

dangerous and may invalidate the phone's type approval and guarantee.

When the battery is running low,

is displayed and a warning

signal is heard. To charge the battery, connect the mains adapter to a
wall socket and to the charging socket

is displayed briefly when the charger is connected to the phone,

and

when it is disconnected. The battery charge indicator will

be animated while charging. It takes approximately 3 hours to fully
charge the battery.

is displayed on the screen when charging is completed. If the

phone is turned off when the charger is connected to the phone only
the battery charge status indicator will be shown on the display.

Note!

To save power the LCD backlight goes off after a while. Press any key to

illuminate the display. Full battery capacity will not be reached until

the battery has been charged 3–4 times. Batteries degrade over time,

which means that call time and standby time will normally decrease

with regular use.

Save energy

When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall outlet.

Summary of Contents for PHONEEASY 505
















































Search results

Summary of Contents for PHONEEASY 505

Reviews:

Related manuals for PHONEEASY 505

Brands by name

Popular brands

Doro PHONEEASY 505, Manual

Search results

Summary of Contents for PHONEEASY 505

Reviews:

Related manuals for PHONEEASY 505

Brands by name

Popular brands