34
www.doro.com
///-----------Network Settings------------
%SIP_RPORT_ENABLE%:1
//0-disable, 1-enable, a way around NAT
%SIP_STUN_ENABLE%:0
//0-disable, 1-enable stun services
%NETWORK_STUN_SERVER%:”stun01.sipphone.com”
//STUN Server address
%SIP_STUN_BINDTIME_GUARD%:80
//seconds how often the system will guard the NAT bindings
%SIP_STUN_BINDTIME_DETERMINE%:0
//0-disable, 1-enable
%SIP_STUN_KEEP_ALIVE_TIME%:90
//seconds how often keep-alives are sent
//------------Network Time---------------
%NETWORK_SNTP_SERVER%:”europe.pool.ntp.org”
//NTP Server address
%NETWORK_SNTP_SERVER_UPDATE_TIME%:15
//minutes between fetch of network time, 1-255
%DAY_LIGHT_SAVING%:1
//0-disable, 1-enable
%GMT_TIME_ZONE%:14
//Timezone (0=-12h,1=-11h,..,9=-3:30h,..,13=0h GMT, 14=+1h,
//--------Provisioning Server------------
%MANAGEMENT_TRANSFER_PROTOCOL%:1
//0-TFTP, 1-HTTP
%NETWORK_TFTP_SERVER%:”config.server.com”
// Configuration Server IP or FQDN
%NETWORK_FWU_SERVER%: “www.doro.com”
// Firmware update server IP or FQDN
%FWU_TFTP_SERVER_PATH%:”downloads/ip880dect/upgrade/”
//subdir to find firmware upgrades
//------------SIP Server 0 =
SIP server 1 in handset
---------------
%SRV_0_SIP_UA_DATA_SERVER_PORT%:5060
//listening port of the proxy-server/registration-server port
%SRV_0_SIP_UA_DATA_DOMAIN%:”proxy.SIPserver1.com”
//SIP Server address
%SRV_0_SIP_UA_DATA_PROXY_ADDR%:”proxy.SIPserver1.com”
//SIP Server address. If not defined, DOMAIN
parameter is used as proxy
%SRV_0_SIP_UA_DATA_SERVER_IS_LOCAL%:0
//0-not local, 1-local to override NAT settings
%SRV_0_SIP_UA_DATA_REREG_TIME%:3600
//Re-registration time in seconds
%SRV_0_SIP_URI_DOMAIN_CONFIG%:0
//0:If NO <domain> Domain will be added, 1:must specify full URI,
2:<domain> will be replaced by Domain parameter
%SRV_0_SIP_UA_CODEC_PRIORITY%:1,0,3,4,0xFF
//Codec priority, iLBC(20 ms) and 3:iLBC(30 ms) cannot be
combined. 0:pcmU(20 ms),1:pcmA(20 ms),2:iLBC(20 ms),3:iLBC(30 ms),4:G729AB. String must end with 0xFF
%SRV_0_DTMF_SIGNALLING%:2
//0: In-band generation, 1: SIP-Info, 2:RTP Named Event(RFC2833)
%SRV_0_SIP_UA_DATA_SERVER_TYPE%:1
//Server type, 1-SIP
//------------SIP Server 2 =
SIP server 2 in handset
---------------
%SRV_2_SIP_UA_DATA_SERVER_PORT%:5060
%SRV_2_SIP_UA_DATA_DOMAIN%:”proxy.SIPserver2.com”
%SRV_2_SIP_UA_DATA_PROXY_ADDR%:”proxy.SIPserver2.com”
%SRV_2_SIP_UA_DATA_SERVER_IS_LOCAL%:0
%SRV_2_SIP_UA_DATA_REREG_TIME%:3600
%SRV_2_SIP_URI_DOMAIN_CONFIG%:0
%SRV_2_SIP_UA_CODEC_PRIORITY%:0,1,3,4,0xFF
%SRV_2_DTMF_SIGNALLING%:2
%SRV_2_SIP_UA_DATA_SERVER_TYPE%:1 //1-SIP
// ------------- Registration 1 -------------------
%SUBSCR_0_SIP_UA_DATA_SIP_NAME%:”1234”
//SIP username
%SUBSCR_0_UA_DATA_DISP_NAME%:”1234”
//Display name
%SUBSCR_0_UA_DATA_AUTH_NAME%:”1234”
//Authentication name
%SUBSCR_0_UA_DATA_AUTH_PASS%:”1a2b3c4d”
//Authentication password
%SUBSCR_0_SIP_UA_DATA_VOICE_MAILBOX_NUMBER%:”8000”
//Voice Mailbox number to dial
%SUBSCR_0_SIP_UA_DATA_SIP_NAME_ALIAS%:”1234”
//Alias name for Phone UI
%SUBSCR_0_SIP_UA_DATA_VOICE_MAILBOX_NAME%:”sip:[email protected]”
//Voice Mailbox uri (RFC 3842)
%SUBSCR_0_SIP_UA_DATA_SERVER_ID%:0
//SIP Server to use, 0 or 2
// ------------- Registration 2 --------------------
%SUBSCR_1_SIP_UA_DATA_SIP_NAME%:”4321”
%SUBSCR_1_UA_DATA_DISP_NAME%:”4321”
%SUBSCR_1_UA_DATA_AUTH_NAME%:”4321”
%SUBSCR_1_UA_DATA_AUTH_PASS%:”a1b2c3d4”
%SUBSCR_1_SIP_UA_DATA_VOICE_MAILBOX_NUMBER%:”8000”
%SUBSCR_1_SIP_UA_DATA_SIP_NAME_ALIAS%:”4321”
%SUBSCR_1_SIP_UA_DATA_VOICE_MAILBOX_NAME%:”sip:[email protected]”
%SUBSCR_1_SIP_UA_DATA_SERVER_ID%:2
// ------------- Registration 3 -------------------
%SUBSCR_2_SIP_UA_DATA_SIP_NAME%:””
%SUBSCR_2_UA_DATA_DISP_NAME%:””
%SUBSCR_2_UA_DATA_AUTH_NAME%:””
%SUBSCR_2_UA_DATA_AUTH_PASS%:””
%SUBSCR_2_SIP_UA_DATA_VOICE_MAILBOX_NUMBER%:””
%SUBSCR_2_SIP_UA_DATA_SIP_NAME_ALIAS%:””
%SUBSCR_2_SIP_UA_DATA_VOICE_MAILBOX_NAME%:””
%SUBSCR_2_SIP_UA_DATA_SERVER_ID%:0
Summary of Contents for IP880 DECT
Page 1: ...ip880dect Owners Manual English ...
Page 43: ...40 www doro com ...
Page 44: ...English Version 1 0 ...
