Doro IP880 DECT Owner'S Manual Download Page 32

Page: 32 / 44

www.doro.com

SIP/RTP Settings

SIP/RTP ports can be defined if server or routers requires it.

Silence suppression for G729

: This defines if silence suppression shall be used.

This is only used if the codec supports it. Currently supported: G729 annex B

SIP/RTP port range

: The number of ports that can be used for RTP audio streaming

SIP/RTP port

: The first RTP port to use for RTP audio streaming

Local SIP port

: Port used for first user agent (UA) instance. Succeeding UA’s will get

succeeding ports

SIP/RTP TOS

: Priority of RTP traffic based on the IP layer ToS byte. See RFC 1349

for details. “cost bit” is not supported.

o Bit 7..5 defines precedence.

o Bit 4..2 defines Type of Service.

o Bit 1..0 are ignored.

Setting all three of bit 4..2 will be ignored.

Click

SAVE CHANGES

and thereafter

REBOOT

if no further settings are to be made.

IP Settings

In the menu, choose IP Settings to configure the following

DHCP/Static IP

: Specifies whether to use dynamic or static IP.

IP Address

: Specifies the Internet address.

Subnet Mask

: Specifies the subnet mask.

Default gateway

: Specifies the gateway (router) address..

DNS (primary)

: Specifies the IP address of the DNS server

DNS (secondary)

: Specifies the IP address of the alternative DNS server

Click

SAVE CHANGES

and thereafter

REBOOT

if no further settings are to be made.

Pincode Settings

In the menu, choose Pincode Settings to configure the following

VoIP Settings Pincode

: Base station VoIP access code (default 0000)

AC Code

: Base station DECT registration access code (default 0000)

HTTP Server Username

: Local HTTP server authentication name (default: admin)

HTTP Server Password

: Local HTTP server password (default: admin)

Note!

If you gateway has a public IP address or is otherwise exposed to the Internet it's highly recommended to

change the password.

Click

SAVE CHANGES

and thereafter

REBOOT

if no further settings are to be made.

•

Summary of Contents for IP880 DECT













































Search results

Summary of Contents for IP880 DECT

Reviews:

Related manuals for IP880 DECT

Brands by name

Popular brands

Doro IP880 DECT, Owner'S Manual

Search results

Summary of Contents for IP880 DECT

Reviews:

Related manuals for IP880 DECT

Brands by name

Popular brands