Doro IP880 DECT, Owner'S Manual

Page: 12 / 44

9
www.doro.com
First setup via web-interface
The following sections describe how to configure and set up your phone for first use.
You have to configure your phone before it is ready for first use. You will need the
account information that you received from your SIP Service Provider to complete the
configuration of your phone.
Configure using a web browser
Open a browser on your PC; go to the IP address of the gateway (Press the volume up
key to get the IP address).
Log in to the menu. Default settings:
username:
admin
password:
admin
In the menu, select and configure VoIP Server 1 (and VoIP Server 2 if required) by filling in:
• Server is local: Yes or No
• Proxy address: IP or DNS address of the SIP-Server
• Domain: Usually the same as Proxy address
• Server port: 5060 is default
• Re-registration time: 3600 is default
• Domain config:
Add domain
or
Force domain
• DTMF Signalling:
Inband
,
SIP-Info
or
RFC2833
• Codec priority: Set the order for codec usage
• Enable silence suppression:
Yes
or
No
Click SAVE CHANGES�
In the menu, choose
VoIP Accounts
and configure
Account 1
(and 2 -8 if needed):
• Account alias name: Name of the account used in call groups (Nickname)
• Used VoIP server: VoIP Server 1 (or 2. if the second VoIP Server has been configured)
• SIP user name: Usually the phone number you received from your service provider
• SIP auth name: Usually the same as SIP user name
• SIP auth password: the password you received from your SIP Provider
• Display name (optional): Caller ID that the called party sees
• Voice Mailbox Name:
• Voice Mailbox Number:
Click
SAVE CHANGES .
If more than one VoIP Server or VoIP Accounts has been configured you may select
which account should ring on your handset and also set what account (or line) to use for
outgoing calls in the menu
Telephony Settings
.
Click SAVE CHANGES .
Click
Reboot
to activate your settings.
1�
2�
3�
4�
5�
6�
7�
8�
9�