Dorner 73U005HS423FN, Installation, Maintenance & Parts Manual

Page: 9 / 20

851-679 Rev. C 9 Dorner Mfg. Corp.
7350 Series Side Mount 90° Drive Package
Installation
CE Version Side Drive Package
Required Tools
• 3/16 " hex wrench
• 8 mm hex wrench
• 13 mm wrench
• Large flat head screwdriver
Figure 10
Figure 10
Typical Side Drive Package Components (Figure 11) .
Figure 11
Figure 11
1. On side of conveyor motor is being installed, remove
upper front head plate mounting screw
(Figure 12, item 1) .
Figure 12
Figure 12
A
WARNING
SEVERE HAZARD!
LOCK OUT POWER before removing guards
or performing maintenance. Exposed moving
parts can cause serious injury.
A
WARNING
PUNCTURE HAZARD!
Handle drive shaft keyway with care. It may
be sharp and could puncture the skin,
causing serious injury.
NOTE
Gearmotor may be operated in positions 1 or
3
(Figure 10) .
1 3
1 Hex Head Cap Screw, M8-1.25 x 20 mm (x2)
2 Hex Head Cap Screw, M8-1.25 x 40 mm
3 Collar Clamp
4 Support Arm
5 Mounting Bracket
6 Hex Head Cap Screw, M10-0.50 x 40 mm
7 Gearmotor Assembly
5
6
3
7
2
4
1
1